Home/ dhtutoria/Best Answers
  1. Asked: June 19, 2022In:

    The way to solve the “{“message”: “Missing Authentication Token”}” error.

    dhtutoria Expert

    Cause The error ""message": "Missing Authentication Token"" might have a variety of causes. However, the first cause you should consider is Forgetting to Deploy. Solution If you just test your endpoint in the console and see the desired results without implementing your changes, you will never be abRead more

    Cause

    The error “”message”: “Missing Authentication Token”” might have a variety of causes. However, the first cause you should consider is Forgetting to Deploy.

    Solution

    If you just test your endpoint in the console and see the desired results without implementing your changes, you will never be able to see your API in the real world. Using Gateway’s built-in deployment functionality, you can publish new changes to the Internet.

    As shown in the picture above, go to your API and choose the Actions tab. When you click Deploy API, you’ll be sent to the configuration method.

    If you’ve already built up stages, deploy to one of them; if you haven’t, build one with whatever name you choose. If you’d like, you may leave a message, but otherwise you’re ready deploy.

    Remember that you must redeploy your API after each modification to ensure that those changes are published to the Internet.

    I hope that by doing so, you’ll be able to solve your problem.

    See less
    • 2
  2. Asked: June 15, 2022In:

    how to solve “ActionController::UnknownFormat” error

    dhtutoria Expert
    This answer was edited.

    Cause: The “ActionController::UnknownFormat” error occured because you set HTML as the only format to react to. As a result, you missed a format in a response that you wish to support. Solution: When writing a blog post, you should consider an action where you want to reply to HTML and JSON queriesRead more

    Cause: The “ActionController::UnknownFormat” error occured because you set HTML as the only format to react to. As a result, you missed a format in a response that you wish to support.

    Solution: When writing a blog post, you should consider an action where you want to reply to HTML and JSON queries to help your page be able to support an Ajax request. This is what it may look like:

    class BlogPostsController < ApplicationController
def create
@blog_post = BlogPost.new(blog_post_params)
respond_to do |format|
if @blog_post.save
format.html { redirect blog_post_path(@blog_post) }
format.json { render json: @blog_post.to_json }
else
render :new
end
end
end
end

    When the blog post fails validations and is not saved, this error is raised. within the response block’s scope of word formatting blocks, You must use the render command. If you were to rewrite this to account for failure, it would look like this:

    class BlogPostsController < ApplicationController
def create
@blog_post = BlogPost.new(blog_post_params)
respond_to do |format|
if @blog_post.save
format.html { redirect blog_post_path(@blog_post) }
format.json { render json: @blog_post.to_json }
else
format.html { render :new }
format.json { render json: @blog_post.errors.to_json }
end
end
end
end

    And now, there will be no more unintended ActionController::UnknownFormat exceptions that all formats have been declared.

    See less
    • 2
  3. Asked: June 12, 2022In:

    The best way to solve “_registerComponent(…): Target container is not a DOM element” error.

    dhtutoria Expert
    This answer was edited.

    Cause: Keeping the script in the head and rendering on DOMContentLoaded is a viable option. However, if you retain the script in the head in this case, the document element will not be available when the script is launched. This is the reason why you're getting the error: "_registerComponent(...): TRead more

    Cause:

    Keeping the script in the head and rendering on DOMContentLoaded is a viable option. However, if you retain the script in the head in this case, the document element will not be available when the script is launched. This is the reason why you’re getting the error: “_registerComponent(…): Target container is not a DOM element”.

    Solution:

    First of all, your script should be placed at the bottom of the body, and the root component should be displayed to a div before it, as seen below:

    <html>
<head>
</head>
<body>
<div id="root"></div>
<script src="/bundle.js"></script>
</body>
</html>

    Then let’s order in the bundle.js as below:

    React.render(<App />, document.getElementById('root'));

    In this post, I’ll give you one more piece of advise. Unless you always render to a nested div instead of the body, the 3rd party code ( for example browser plugins, Google Font Loader,…) can alter the DOM node’s body when React does not anticipate it, resulting in strange issues that are difficult to track down and fix.

    I hope that my solutions will be useful for you to solve your “_registerComponent(…): Target container is not a DOM element” error.    

    See less
    • 15
  4. Asked: June 11, 2022In:

    How to fix “uncaught syntaxerror: unexpected token <" error?

    dhtutoria Expert
    This answer was edited.

    Cause: After looking over your program, I discovered that instead of a JS file, your script tag links to an HTML file. This is why the warning message "Uncaught SyntaxError: Unexpected token '<' " appears. Solution: Let's check that any script tags you're using point to a valid path and ensure thRead more

    Cause: After looking over your program, I discovered that instead of a JS file, your script tag links to an HTML file. This is why the warning message “Uncaught SyntaxError: Unexpected token ‘<‘ ” appears.

    Solution: Let’s check that any script tags you’re using point to a valid path and ensure that the names of your files are written in lowercase letters. The issue may occur if the file name contains capital letters or uncommon characters. If you follow the steps outlined above, the issue you’re having will be resolved effectively.  

    See less
    • 9
  5. Asked: May 11, 2022In:

    Amazing Solutions For valueerror: object arrays cannot be loaded when allow_pickle=false Error

    dhtutoria Expert
    This answer was edited.

    The cause: The error can occur due to the following reasons: Saving a python list of numpy arrays that used np.save and then it is loaded with np.load. Therefore, imdb.load_data didn't allow pickle. Solution: You should do this way to compel imdb.load_data to permit pickle. Change: (train_data, traiRead more

    The cause: The error can occur due to the following reasons: Saving a python list of numpy arrays that used np.save and then it is loaded with np.load. Therefore, imdb.load_data didn’t allow pickle.

    Solution: You should do this way to compel imdb.load_data to permit pickle.

    Change:

    (train_data, train_labels), (test_data, test_labels) = imdb.load_data(num_words=10000)

    into:

    import numpy as np
# save np.load
np_load_old = np.load

# modify the default parameters of np.load
np.load = lambda *a,**k: np_load_old(*a, allow_pickle=True, **k)

# call load_data with allow_pickle implicitly set to true
(train_data, train_labels), (test_data, test_labels) = imdb.load_data(num_words=10000)

# restore np.load for future normal usage
np.load = np_load_old
    👇️ Read more: Fixing “ValueError: Object arrays cannot be loaded when allow_pickle=False”
    See less
    • 17
  6. Asked: May 11, 2022In:

    Steps to fix “uncaught syntaxerror: unexpected token o in json at position 1” error

    dhtutoria Expert
    This answer was edited.

    The cause:  The reason is that JSON.parse() created a string from the input. While the method toString() of JavaScript objects obviously returns [object Object]. It is already a JavaScript object, and it does not have any JSON string in the code. Solution:  No need to bother about parsing. Maybe youRead more

    The cause:  The reason is that JSON.parse() created a string from the input. While the method toString() of JavaScript objects obviously returns [object Object]. It is already a JavaScript object, and it does not have any JSON string in the code.

    Solution:  No need to bother about parsing.

    Maybe you just check in Chrome’s console:

    new Object().toString() 
// "[object Object]" 

JSON.parse(new Object()) 
// Uncaught SyntaxError: Unexpected token o in JSON at position 1 

JSON.parse("[object Object]") 
// Uncaught SyntaxError: Unexpected token o in JSON at position 1
    See less
    • 16
  7. Asked: May 11, 2022In:

    Why do I get the typeerror: unhashable type: ‘numpy.ndarray’ error?

    dhtutoria Expert

    The cause: The variable energies likely have unacceptable shape: Solution: Instead of writing by your approach: >>> data array([[ 1., 2., 3.], [ 3., 4., 5.], [ 5., 6., 7.], [ 8., 9., 10.]]) >>> hsplit(data,3)[0] array([[ 1.], [ 3.], [ 5.], [ 8.]]) Probably you use this way: >Read more

    The cause: The variable energies likely have unacceptable shape:

    Solution:

    Instead of writing by your approach:

    >>> data 
array([[ 1., 2., 3.], 
[ 3., 4., 5.], 
[ 5., 6., 7.], 
[ 8., 9., 10.]]) 
>>> hsplit(data,3)[0] 
array([[ 1.], 
[ 3.], 
[ 5.], 
[ 8.]])

    Probably you use this way:

    >>> data[:,0] 
array([ 1., 3., 5., 8.])
    See less
    • 21
  8. Asked: May 11, 2022In:

    typeerror: slice indices must be integers or none or have an __index__ method – Simple solution when encountering the error

    dhtutoria Expert

    The cause:  The error is detected because your slice index is malformed, it must be in one of the following categories: integers/ none/ have an __index__ method Solution:  You should change to an int as this way: left = m[0:int(half)]

    The cause:  The error is detected because your slice index is malformed, it must be in one of the following categories: integers/ none/ have an __index__ method

    Solution: 

    You should change to an int as this way:

    left = m[0:int(half)]
    See less
    • 9
  9. Asked: May 11, 2022In:

    Stabilizing the error: typeerror: ‘<‘ not supported between instances of ‘str’ and ‘int’ with the best answers

    dhtutoria Expert
    This answer was edited.

    The cause: When using Python3.x, this error happens because the function gets the input and converts a line to a string and then it is returned. Solution: To deal with this error, you need to use int method to transform string into integer like this: vote = int(input('Enter the name of the player yoRead more

    The cause: When using Python3.x, this error happens because the function gets the input and converts a line to a string and then it is returned.

    Solution: To deal with this error, you need to use int method to transform string into integer like this:

    vote = int(input('Enter the name of the player you wish to vote for'))
    See less
    • 19
  10. Asked: May 11, 2022In:

    The engine node is incompatible with this module – How can I circumvent the error?

    dhtutoria Expert
    This answer was edited.

    The cause: Your Node version is out of date and doesn't match the module Solution: Upgrading to the latest node version will solve this error You can use this way to fix the error: yarn config set ignore-engines true Method for a long-lasting solution is: delete node_modules/, package-lock.jsonRead more

    The cause: Your Node version is out of date and doesn’t match the module

    Solution: Upgrading to the latest node version will solve this error

    You can use this way to fix the error:

    yarn config set ignore-engines true

    Method for a long-lasting solution is:

    1. delete node_modules/, package-lock.json & yarn.lock
    2. run yarn install or npm i again.

     

    See less
    • 9